FEM Racking and Shelving Latest codes update


10.2.18 the new code for the design of Racking on Mobile Racking bases was published in 2023.

10.2.20 Worked Example to the revised EN 15512 was re-published in November 2021, following editorial revisions.

10.2.19 the new code for Shuttle systems was published in early November 2021.

10.2.17 Worked Example for Drive In Racking Parts 1 & 2 were published in December 2019.

10.2.14 Warehouse Floors Parts 1 and 2 were published in December 2018.

10.2.16 on Racking Protection was made available from November 2017.

10.2.09 Design of Cantilever Racking was available from the end of July 2015.

FEM Racking and Shelving also published four further FEM codes in March 2015.

  • 10.2.06 Part 2   Design of Hand Loaded Steel Static Shelving, which adds onto 10.2.06 Part 1 for low rise shelving.
  • 10.2.11 Part 1   Rail Dependent Storage and Retrieval Systems; Pallet Racking
  • 10.2.15 Part 1   Worked Example Adjustable Pallet Racking According to EN 15512; 2009. Unbraced.
  • 10.3.01 Part 1   Tolerances, Deformations and Clearances in the Storage System.

To purchase any of these documents or any other FEM codes please go to our Publications section, which lists all the codes currently available, with descriptions and their prices. Please note that we only sell copies in bound paper versions and not in electronic formats.

Back to News